Change Of The Hinge Position - Pkm KG262EIX-M Bedienungsanleitung

3.4 Change of the hinge position

WARNING! Switch off and unplug the appliance before changing the
hinge position. RISK OF ELECTRIC SHOCK!
CAUTION! The change of the position must be carried out by at least
two persons; otherwise you may hurt yourself or damage the appliance.
NOTICE! You should contact a qualified technician if you want to have
the door swing reversed. Only try to carry out the steps described below
when you believe that you are qualified to do so.
NOTICE! Adjust the doors properly before you finally tighten the screws of
the hinges. The seals must close properly.
NOTICE! Do not tilt the appliance more than 45
¾ Empty the appliance.
¾ If possible, remove all door trays, glass shelves, drawers, etc.
so that they cannot be damaged.
¾ It is necessary to tilt the appliance backwards while removing the doors. Lean the
appliance against a solid and immovable surface so it will not slip while changing
the hinge positions.
¾ Do not lay the appliance flat as this can damage the cooling system.
¾ All parts removed must be saved for proper reinstallation of the doors.
¾ Always remove the doors carefully. Keep the doors in a safe place so that they
cannot be damaged.
T
OOLS REQUIRED
F
LAT BLADED SCREWDRIVER
Depending on model.
20
P
REPARATORY MEASURES
(
NOT INCLUDED IN THE SCOPE OF DELIVERY
H
EXAGON WRENCH
0
.
from the appliance
20
P
HILLIPS SCREWDRIVER
)