11. Remove the middle screw hole covers (7) from the left side of the appliance and
reinstall it on the right side (s. fig. below).
7
12. It is necessary to tilt the appliance backwards. Lean the appliance against a solid
and immovable surface so it will not slip. Do not tilt the appliance more than 45°.
13. Unscrew the bottom door hinge (8) and the adjustable feet (9 / s. fig. below).
8
9
14. Unscrew (anti-clockwise) the hinge pin (10) of the bottom door hinge (8) and
remove it (s. fig. below).
15. Turn the bottom door hinge through 180° (s. fig. below).
16. Reinstall (clockwise) the hinge pin (10) on the bottom door hinge (8 a / s. fig.
below).
M
IDDLE SCREW HOLE COVERS
B
OTTOM DOOR HINGE
A
DJUSTABLE FEET