Emperature Setting; Initial Operation - Pkm KG262EIX-M Bedienungsanleitung

1. Remove all packaging materials.
2. Adjust the feet and clean the appliance (see chapter
MAINTENANCE
3. Do not start the appliance immediately after installation. Wait at least 4 - 6 hours
to ensure proper operation.
4. Connect the appliance to the mains properly.
5. The temperature setting of the fridge can be adjusted manually by turning the
thermostat to the desired setting.; s. chapter 4.3 T
(
THERMOSTAT SETTING
6. The noise generated by the compressor and the gases / liquids of the appliance
is normal.
7. If operation was interrupted, wait 5 minutes before restart.
8. The appliance needs some time to balance temperatures when you have changed
the settings before or when you have stored additional food in the appliance. The
duration of this period of time depends on the range of the change, the ambient
temperature, the amount of food and the frequency of door-openings. When you
set the temperature of the appliance these aspects should be considered.
9. Due to the difference of pressure, the doors may be difficult to open shortly after
closing. Wait a few minutes and you can open the doors easily.
10. Operate the appliance according to the instructions described in the following
chapters.
¾ Set the thermostat of the appliance to a medium setting and let the empty
appliance operate for 3 to 4 hours.
¾ Select your desired setting. You can store food in the appliance now.
).
).
I
NITIAL OPERATION
CLEANING AND

EMPERATURE SETTING