Connection A - High Vacuum Flange - Agilent Technologies Turbo-V 81-M Bedienungshandbuch

17 Technical Information
Typical Layout Diagram

Connection A - High Vacuum Flange

To connect the Turbo-V 81-M pump to the ISO inlet flange, remove
the outer ring and position the centering ring as shown in the figure.
Figure 30
Then fix the two flanges with the clamps or claws as shown in the
figure.
Figure 31
For ConFlat flange connections we recommend using Agilent
hardware.
216/228
All manuals and user guides at all-guides.com
Turbo-V 81-M User Manual / 87-900-983-01 (E)