Connection A - High Vacuum Flange - Agilent Technologies TV 303 Bedienungshandbuch

17
Technical Information
TV 303 Controller Installation
Connection A – High Vacuum Flange
To connect the Turbo-V303 pump to the ISO inlet flange, remove the
outer ring and position the cen-tering ring as shown in the figure.
Figure 43
Then fix the two flanges with the clamps as shown in the figure.
Figure 44
For ConFlat flange connections we recommend using Agilent
hardware.
TV 303 User Manual / 87-901-019-01 (A) 255/268