Proper Use - Scheppach AB1600 Original Anleitungen

The operator
Common sense and caution are factors which cannot be
installed in a machine. The operator is responsible for
these factors. Note:
• Avoid body contact with grounded surfaces such as
pipes or radiators.
• Be vigilant. Do not work on the machine when you
are tired.
• Do not operate the product under the influence of
alcohol or drugs. Read the warning notice to deter-
mine if your sense of judgement or reflexes may be
impaired.
• Nonslip footwear is recommended.
• Protect long hair using appropriate means.
Wear eye and ear protection. Always wear:
• ANSI-approved dust respirators.
• Hearing protection.
• Keep your balance at any time.
m Proper Use
The machine conforms to the current EC Machinery Directive
• Before starting work, all protective and safety devices
should have been installed on the machine.
• The machine is designed for operation by one person.
The operator is responsible for third parties in the
work area.
• Observe all safety and hazard instructions at the ma-
chine.
• The device is designed for heavy demolition and chi-
selling work using an appropriate chisel.
• The machine may be operated only according to its
intended use. Any use other than that intended is
improper. It is not the manufacturer but the user
/ operator who is liable for any damage or injuries
caused.
• Please note that our equipment have not been desig-
ned for use in commercial, trade or industrial appli-
cations. We do not assume any liability if it is used
in commercial, trade or industrial businesses or any
other equivalent activity.
• All safety and hazard instructions at the machine
must be kept in a legible condition.
• Use the machine only in perfect working condition
and according to its intended purpose, as well as
adequate consideration of safety aspects and hazards
in compliance with this operating manual. All mal-
functions which might affect safety must be (allowed
to be) rectified immediately!
• The safety, work and maintenance instructions of the
manufacturer as well as the dimensions indicated in
the technical data must be followed.
• The relevant accident prevention regulations and
other, generally accepted safety rules must be fol-
lowed.
• The machine may be used, serviced or repaired only
by people, who are familiar with it and are instruc-
13