Scheppach AB1600 Original Anleitungen Seite 5

MANUFACTURER:
scheppach Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
We wish you much joy and success in working with your
new machine.
Note:
The manufacturer of this equipment shall be liable in
accordance with the applicable product liability law for
damage caused to or by this device through:
• Improper handling,
• Noncompliance with the operating instructions,
• Repairs by third parties, unauthorised specialists,
• Installation and exchange of unoriginal spare parts,
• Unintended use,
• Failure of the electrical system due to non-compli-
ance with electrical requirements and VDE specifi-
cations 0100, DIN 57113 / VDE0113.
WE RECOMMEND:
Before using the demolition hammer, please read the
instructions included in this manual carefully.
Read the operating instructions:
Read the operating manual carefully, before putting the
demolition hammer in operation or making any adjust-
ments to it.
Dangerous voltage
Caution! Turn off the power supply before making any
adjustments to the demolition hammer.
Risk of sudden start
Caution! The demolition hammer may restart suddenly
after a power failure.
Read the entire operating instructions before assembly
and getting started with the device.
This operation manual should help you to familiarise you
with your machine and use it for intended applications.
The operating manual includes important information,
on how to work safely, correctly and economically with
the machine and how to avoid hazards, save repair costs,
reduce downtimes and increase the reliability and service
life of the machine.
In addition to the safety regulations of this operating ma-
nual, you must follow the national provisions applicable
to the operation of the machine.
Keep the operating manual close to the machine, safely
in a plastic cover protected against dirt and moisture. It
must be read by every operator before starting work and
carefully followed.
Work at the machine may be done only by persons, who
are instructed on using the machine and the associated
hazards. The minimum age specified should be complied
with.
Besides the safety instructions included in this operating
manual and the special instructions of your country, the
generally accepted technical rules should be followed
for the operation.
5