Device Description; Scope Of Delivery; Intended Use - Scheppach AB1900 Originalbetriebsanleitung

2. Device description (Fig. 1-5)
1. Motor housing
2. ON- / OFF switch
3. Handle
4. Oil fill opening / sight glass
5. Additional handle
6. Tool holder
7. Point chisel
8. Locking bolt
9. Clamping screw
10. Locking switch
11. Tapping screw
3. Scope of delivery (Fig. 6)
(1x) Demolition Hammer
(1x) Transport box (A)
(1x) oil bottle (B)
(1x) Point-chisel ø 30 L390 (C)
(1x) Flat-chisel ø 30 L390 (D)
(1x) Instruction manual
• Open the packaging and remove the de-
vice carefully.
• Remove the packaging material as well
as the packaging and transport bracing
(if available).
• Check that the delivery is complete.
• Check the device and accessory parts
for transport damage. When complaints
the dealer must be informed immediate-
ly. Subsequent complaints will not be
accepted.
• If possible, store the packaging until the
warranty period has expired.
• Read the operating instructions to make
yourself familiar with the device prior to
using it.
22 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Heruntergeladen von manualslib.de Handbücher-Suchmachiene
• Only use original parts for accessories
as well as for wearing and spare parts.
Spare parts are available from your spe-
cialized dealer.
• Specify our part numbers as well as the
type and year of construction of the de-
vice in your orders.
m Attention!
The device and packaging materials
are not toys! Children must not be al-
lowed to play with plastic bags, film
and small parts! There is a risk of swal-
lowing and suffocation!

4. Intended use

The machine is intended for heavy chis-
elling and demolition work as well as for
driving in and compacting with the appro-
priate accessories.
The equipment is allowed to be used only
for its prescribed purpose. Any other use
is deemed to be a case of misuse. The us-
er/operator and not the manufacturer will
be liable for any damage or injuries of any
kind resulting from such misuse.
An element of the intended use is also the
observance of the safety instructions, as
well as the assembly instructions and op-
erating information in the operating man-
ual.
Persons who operate and maintain the
machine must be familiar with the man-
ual and must be informed about potential
dangers.