Introdu Ction; Device Description; Scope Of Delivery; Proper Use - Scheppach AB1500MAX Original Bedienungsanleitung

1. Introdu ction

Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new tool brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability
laws, the manufacturer of this device assumes no
liability for damage to the device or caused by the
device arising from:
• Improper handling,
• Non-compliance with the operating manual,
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts
• Application other than specified
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100,
DIN 13 / VDE0113 not being observed
Please consider:
Read through the complete text in the operating
manual before installing and commissioning the
device.
The operating manual is intended to help the user to
become familiar with the machine and take advantage
of its application possibilities in accordance with the
recommendations.
The operating manual includes important instructions
for safe, proper and economic operation of the
device, for avoiding danger, for minimising repair
costs and downtimes, and for increasing the reliability
and extending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations
applicable to the operation of the device in your
country.
Keep the operating manual package with the machine
at all times and store it in a plastic cover to protect
it from dirt and moisture. They must be read and
carefully observed by all operating personnel before
starting the work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards. The required
minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.

2. Device description

1. Handle
2. On/off switch
3. Additional handle
4. Chuck lock
5. Tool receiver
6. Oil filling opening
7. Maintenance tool
8. Pointed chisel
9. Flat chisel
10. Lubricating grease

3. Scope of delivery

• Operating manual
• Pointed chisel
• Flat chisel
• Maintenance tool
• Lubricating grease

4. Proper use

The machine may only be used in the intended
manner. Any use beyond this is improper. The user/
operator, not the manufacturer, is responsible for
damages or injuries of any type resulting from this.
An element of the intended use is also the
observance of the safety instructions, as well as the
assembly instructions and operating information in
the operating manual.
Persons who operate and maintain the machine
must be familiar with it and must be informed about
potential dangers.
In addition, the applicable accident prevention
regulations must be strictly observed.
Other general occupational health and safety-related
rules and regulations must be observed.
The liability of the manufacturer and resulting
damages are excluded in the event of modifications
of the machine.
The machine may only be operated with original parts
and original accessories from the manufacturer.
The safety, operating and maintenance specifications
of the manufacturer, as well as the dimensions
specified in the technical data, must be observed.
Please observe that our equipment was not designed
with the intention of use for commercial or industrial
purposes. We assume no guarantee if the equipment
is used in commercial or industrial applications, or for
equivalent work.
www.scheppach.com
GB | 17