General Information; Characteristic Noise Values - Scheppach AB1600 Original Anleitungen

GENERAL INFORMATION

• Check all parts for any transportation damage after
unpacking them. In case of complaints, the supplying
carrier must be notified immediately. Later claims
will not be accepted.
• Check the shipment for completeness.
• Familiarise yourself with the device before using it,
by referring to the operating manual.
• Use only originals parts for accessories, wear parts
and spare parts. You will receive spare parts from
your specialist dealer.
• Indicate our article numbers as well as type and mo-
del of the device in your orders.
AB1600
Delivery contents
Point chisel ø 30 L410
Specifications
Blow count [1/min.]
Dimensions L x W x
H [mm]
Blowing force [Joule]
Vibration level [m/
s2]
Weight [kg]
Drive
Motor V/Hz
Power consumption
P1 W
Protection class
Type of Protection
Technical modifications subject to change!

CHARACTERISTIC NOISE VALUES

The noise at workplace may exceed 85 dB (A).
In this case noise protection measures are necessary for
the user. (Wear ear protection!)
Sound power level L = 105,0 db (A)
WA
Sound pressure level LPA = 84,0 dB (A)
Exposure to noise can cause hearing loss. Total vibration
values determined according to EN ISO 3744.
Chisel
Vibration emission value ah = 18.2 m/s²
Note: The vibration value will change due to the field of
application of the power tool and may exceed the speci-
fied value in exceptional cases.
The specified values are emission levels and do not ne-
cessarily represent safe working values.
Although there is a correlation between emission and
emission levels, it cannot be inferred with certainty whe-
ther additional precautions are necessary or not. Factors
that may affect the current emission levels present in
the workplace include duration of the effects, the type
of working room, other noise sources, etc., the number
of machines and other adjacent processes. The reliable
working values may vary from country to country. Never-
theless, this information should enable the user to make
an assessment of hazard and risk.
Demolition Hammer
Flat chisel ø 30 L410
Oil can
2000
652 x 157 x 276
50
18.2
16
230 V/50 Hz
1600
B
IP20
7