English (Original Instructions) - DeWalt DW717XPS Bersetzt Von Den Originalanweisungen

english
MITRE SAW DW717XPS
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
(U.K. & Ireland only)
Type
Power input
Blade diameter
Blade bore
Blade body thickness
Max. blade speed
Max. cross-cut capacity 90°/90°
Max. mitre capacity 45°
Max. depth of cut 90°
Max. depth of bevel cross-cut 45°
Mitre (max. positions)
Bevel (max. positions)
0° mitre
Resulting width at max. height 89 mm
Resulting height at max. width 320 mm
45° mitre left
Resulting width at max. height 89 mm
Resulting height at max. width 226 mm
45° bevel left
Resulting width at max. height 58 mm
Resulting height at max. width 320 mm
45° bevel right
Resulting width at max. height 30 mm
Resulting height at max. width 320 mm
31.62° mitre, 33.85° bevel
Resulting height at max. width 272 mm
Blade run-down time
Weight
Noise values and vibration values (triax vector sum)
according to EN61029:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN61029 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.
34
WALT one of the
e
DW717XPS
V 230
DC
V 230/115
5
W 1675
mm 250
mm 30
Fuses:
mm 2.2
Europe
min -1 4000
mains
mm 98 x 320
U.K. & Ireland
mm 226
plugs
mm 89
NOTE: This device is intended for the connection to a power
mm 56
supply system with maximum permissible system impedance
Zmax of 0.27 Ω Ohm at the interface point (power service box) of
left 60°
user's supply.
right 51°
The user has to ensure that this device is connected only to a
left 48°
power system which fulfils the requirement above. If necessary,
right 48°
the user can ask the public power supply company for the
system impedance at the interface point.
mm 302
Definitions: Safety Guidelines
mm 76
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to these
mm 213
symbols.
mm 76
mm 302
mm 50
mm 302
mm 22
mm 44
s < 10.0
kg 24
dB(A) 91
dB(A) 99
dB(A) 3.0
EC-Declaration of Conformity
m/s 2 2.1
m/s 2 1.5
MITRE SAW
DW717XPS
D
e
Technical Data are in compliance with:
WARNING: The declared vibration emission level
represents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the vibration
emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool
is switched off or when it is running but not actually
doing the job. This may significantly reduce the
exposure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as: maintain
the tool and the accessories, keep the hands warm,
organisation of work patterns.
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious
injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
WALT declares that these products described under
230 V tools 10 Amperes,
230 V tools 13 Amperes, in