Operation; Before The First Use - Pkm WA6-ES1015D Bedienungsanleitung

D
E

4. Operation

4.1 Before the first use

To remove potential residues in the drum of the appliance caused by production,
testing or transportation of the appliance, a complete wash cycle without
laundry (quick washing programme) should always be started before the
first regular wash cycle.
1. Open the water tap
2. Close the door.
3. Set a quick washing programme (e. g. « Q
appliance is now switched on and in
4. Press the « S
TART
5. The door lock will be activated automatically. The operational status indicator of
the door lock «
6. When the programme is finished, the displays indicates « END » and an acoustic
signal sounds 27
7. The door lock is deactivated automatically after approx. 2 minutes. The
operational status indicator of the door lock «
8. When the programme is finished, always turn the
programme selection back to « O
also chapter 4.6 E
9. Close the water tap.
Depending on model.
27
O
PERATIONAL STATUS INDICATOR
➢ The additional washing function (option) « E
activated.
O
PERATIONAL STATUS INDICATOR
➢ The additional washing function (option) « P
activated.
/ P » -
AUSE BUTTON
» goes on.
.
ND OF A WASHING PROGRAMME
15` ») using the rotary knob. The
UICK
STANDBY MODE
to start the programme.
» to switch off the appliance completely; see
FF
.
~ ~
91
« E »
XTRA RINSE
XTRA RINSE
« P - »
RE WASH
-
RE WASH
.
» goes off.
ROTARY KNOB
» is
» is
for the