Installation Procedure - Carrier XCT7 Installations- Und Benutzerhandbuch

Installation procedure

Outdoor unit installation
Installation location
• The outdoor unit should be placed in a well-ventilated and dry place.
• The noise and exhaust produced should not affect the neighbours and the ventilation.
• Do not install the outdoor unit in places with high proportions of oil, salt spray, or harmful gases.
• Do not install the unit near an electricity box to keep off electromagnetic radiations by more than 3 meters at
least.
• Install a snow cover where required to protect the unit
• The outdoor unit should be installed in shade, avoiding direct sunlight or high temperature and radiation.
• Do not install in dusty or polluted areas
• The unit should be installed in a place not easily accessible by the public.
Installation and maintenance space
As shown below, the location should allow sufficient space for handing and maintenance.
Single installation around the opening
Min200mm
Inlet
Outlet
Single installation around the closure
Min150mm
Min300mm
Intel
Outlet
Min300mm
5
A
Min360mm