EN
OCEAN S7
Function description
Scalding protection for thermal disinfection:
DIP switch 1
This function serves to monitor the sensor range during thermal disinfection.
Thermal disinfection may be accidently aborted if dense steam forms in front
of the shower fi tting. If this happens, disable the function to protect against
exposure to scalding water.
DIP switch 1 „ON"
DIP switch 1 „ON"
Scalding protection
The infrared sensor moni-
tors the panels active area
during thermal disinfection.
38
Shower control
All manuals and user guides at all-guides.com
= Scalding protection activated (preset).
= Scalding protection deactivated.
Security stop
As soon as a user steps in
the panels active area, the
water fl ow will be immedi-
ately stopped and thermal
disinfection aborted.
WimTec OCEAN S7
Restart
Thermal disinfection
will start again after 2
minutes without user
recognition.
30-70 cm
ON
OFF
1
2
3 4 5 6
!
If possible, this
safety function
should always
be activated.
2 min