Warm Water Rinse - WimTec OCEAN S7 Montage- Und Bediensungsanleitung

EN
OCEAN S7
Function description

Warm water rinse:

DIP switch 3
Serves to fl ush the hot water pipe without the user to stay in the
shower controls active area (only with activated automatic shut-off
function DIP 2 = ON, see page 39).
DIP switch 3 „ON"
DIP switch 3 „OFF"
User recognition
User steps in active area
(see page 29), the AquaCap
buttons start pulsating.
30-70 cm
40 Shower control
All manuals and user guides at all-guides.com
= Warm water rinse activated (preset).
= Warm water rinse deactivated.
Activate warm water rinse
By tipping in the head
shower icon within 5 s
after user recognition, a
30 s lasting warm water
rinse will be activated.
WimTec OCEAN S7
ON
OFF
1 2 3 4 5 6
Warm water rinse
After activating the water
fl ows for 30 s without the
user to keep staying in the
active area. Afterwards the
shower panel automatically
turns off.
If the user steps during this
period for at least 5 s in
the active area, the shower
panel will shift in normal
operation mode again.
30 s