General Notes - WimTec OCEAN S7 Montage- Und Bediensungsanleitung

EN
OCEAN S7

General notes

The "General installation
terms and conditions"
provided at
www.wimtec.com apply.
24 Shower control
All manuals and user guides at all-guides.com
Congratulations on purchasing the WimTec OCEAN S7.
In order to ensure that you will be able to enjoy this high-quality
product for many years, please take note of the following cleaning
and maintenance recommendations:
Use mild cleaning agents containing soap
Do not use abrasive, scrubbing, nano sealing or acidic
cleaning agents or disinfectants
Don't use sealing or glass refining (nano effect, lotus effect)
cleaning supplies
Clean the fitting with a soft sponge or cloth only
Do not use steam cleaners
Lime deposits on the glass front panel combined with wetness can
impair the touch-tronic function. To ensure proper operation,
we recommend regular cleaning of the glass panel using a
power cleaner.
This manual is valid for the following products:
WimTec OCEAN S7 - 12 V
WimTec OCEAN S7 - TD 12 V
Delivery scope:
Safety glass front plate, mounting frame with integrated electro-
nics, thermostat knob with hot water barrier, mounting material,
without power supply.
Important installation notes:
Mounting and installation may only be performed by a qualified
service provider in accordance with DIN 1988, ÖVE/ÖNORM E8001
and VDE 0100 Part 701. When planning and installing sanitary
facilities, all relevant local, national and inter-national standards and
provisions must be observed! Provide for 230 V / 12 V power unit
outside of the protected zone.
!
According to the Austrian ÖNORM B 5019, thermal disinfection
requires a minimum temperature of 60 °C for at least 10 min at the
relevant system locations. The operator must ensure that all parts of
the installation (e.g. piping) can withstand the temperatures applied
during thermal disinfection.
WimTec OCEAN S7
Glas weiß Glas schwarz
119 008 119 015
118 902 118 919