Assembly - WimTec OCEAN S7 Montage- Und Bediensungsanleitung

OCEAN S7

Assembly

1
4
1. Remove the fl ush-mount protective cover.
2.
Cut off protruding parts from the fl ush-mount box so it
aligns with the tiles.
3. Where necessary, seal off space between wall and fl ush-
mount set with silicone.
4. Close the main water valve.
5. Open both integrated stop valves using a screwdriver.
6.
Mount adapter for thermostat using the 2.5 Allen key.
All manuals and user guides at all-guides.com
2
5
3
6
Perform the following steps
in the order indicated!
The assembly photos refer
to WimTec OCEAN with
thermal disinfection.
WimTec OCEAN S7
Shower control
EN
!
ATTENTION!
31