WimTec OCEAN S7 Montage- Und Bediensungsanleitung Seite 33

OCEAN S7
Assembly
13
16
13.
Attach the mounting frame using the 4 screws. Make sure
that the cable connections remain intact and the cables are
not crimped.
14. Correctly align the mounting frame and securely fasten the
screws. When tightening the screws, ensure that the moun-
ting frame does not get warped. Apply the included special
grease to the front of the valve.
15.
Connect the mounting frame with the infrared sensors to
the electronics module.
16. Connect the glass front plate to the electronics module.
17. Check the position of the mixer (white dot points upwards).
18. Check the position of the mixer lever – the locking knob
should be pointing directly upwards.
All manuals and user guides at all-guides.com
14
17
15
18
Perform the following steps
in the order indicated!
WimTec OCEAN S7
Shower control
EN
!
ATTENTION!
33