Program Description - WimTec OCEAN W6 Montage- Und Bedienungsanleitung

EN
OCEAN W6

Program description

Fully automatic program mode (default setting):
DIP switch 1=ON, 2=ON
Switch on
As soon as you enter the
sensor range, the water flow
will start automatically.
If your hands frequently leave the sensor range while washing your hands, for example,
i
causing the water flow to stop prematurely, you can extend the shut-off delay to 5 s.
When using an instantaneous water heater, the configured shut-off delay helps to minimi-
se the number of ignition processes.
DIP switch 6 ON = Extended shut-off delay – 5 s.
DIP switch 6 OFF = Standard shut-off delay – 2 s (default setting).
26 Wall tap control
Switch off
Once you clear the sensor
range or after the configu-
red shut-off delay time has
elapsed, the water will stop.
WimTec OCEAN W6
Werkseinstellung:
ON
OFF
1 2 3 4 5 6
ON
OFF
1 2 3 4 5 6
ON
OFF
1 2 3 4 5 6
Safety flow arrest
After the configured water
arrest time has elapsed, the
ON
water flow will automatically OFF
1 2
stop to prevent unintentional
continuous activation.
ON
OFF
1 2
ON
OFF
1
ON
OFF
1
ON
OFF
1
ON
OFF
1
3 4 5 6
3 4 5 6