General description
The illustration of the principal
functionin g parts can be found
on the front foldout page.
Extent of the delivery
Carefully unpack the appliance and check
that it is complete:
Dispose of the packaging material prop-
erly.
• Cordless hand-held vacuum cleaner
• Wet nozzle
• Crevice nozzle
• Brush nozzle attachment
• Universal nozzle attachment
• Instruction Manual
Battery and charger are not inclu-
ded
Description of functions
The cordless hand-held vacuum cleaner is
equipped with a robust, transparency plas-
tic container for holding dirt.
Refer to the following descriptions for the
function of control elements.
Overview
1 Collection container
2 Filter holder
3 Filter (HEPA)
4 Release button
5 On/off switch
6 Universal nozzle attachment
7 Brush nozzle attachment
8 Crevice nozzle
9 Wet nozzle
10 Guide rail
11 Keyhole bore
Technical Data
Cordless hand-held
vacuum cleaner ................ PHSSA 20-Li A1
Nominal voltage U ......................20 V
Protection type................................. IPX0
Run time (idle) ........................16 - 20 min
Collection volume, maximum
Dust......................................... 400 ml
Liquid ...................................... 150 ml
Temperature...........................max. 50 °C
Charging process ...................4 - 40 °C
Operation .......................... -20 - 50 °C
Storage .................................0 - 45 °C
Attention! An up-to-date list
of battery compatibility can
be found at:
www.lidl.de/akku
This device can only be operated with
the following rechargeable batteries:
PAP 20 A1, PAP 20 A2, PAP 20 A3.
This type of battery may only be charged
with the following chargers: PLG 20 A1,
PLG 20 A3, PDSLG 20 A1.
Safety information
This section describes the basic
safety rules when working with the
device.
Symbols used in the
instructions
Hazard symbols with in-
formation on prevention of
personal injury and property
damage.
GB MT
37