Parkside PPS 40 B2 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung Seite 36

Safety instructions
Only use the device in
„
well-ventilated spaces.
Danger from flying sparks
when plasma cutting:
Cutting sparks can cause an
„
explosion or fire.
Keep flammable substances
„
away from the cutting location.
Do not use the plasma cutter
„
near flammable substances.
Cutting sparks can cause fires.
„
Keep a fire extinguisher close
„
by and an observer should
be present to be able to use it
immediately.
Do not carry out plasma
„
cutting on drums or any other
closed containers.
Danger from arc beams:
Arc beams can damage your
„
eyes and injure your skin.
Wear a hat and safety goggles.
„
Wear hearing protection and
„
high, closed shirt collars.
Use a welding safety helmet
„
and make sure that the filter
setting is correct.
Wear complete body
„
protection.
Danger from
electromagnetic fields:
Cutting current generates
„
electromagnetic fields.
36 GB/IE
Do not use if you have a
„
medical implant.
Never wrap the cutting cable
„
around your body.
Guide cutting cables together.
„
z Welding shield-specific
safety instructions
With the help of a bright light
„
source (e.g. lighter) examine
the proper functioning of the
welding shield prior to starting
with any cutting work.
Cut spatters can damage the
„
protective screen. Immediately
replace damaged or scratched
protective screens.
Immediately replace damaged
„
or highly contaminated or
splattered components.
The device must only be
„
operated by people over the
age of 16.
Please familiarise yourself
„
with the cutting safety
instructions. To that end, you
must also observe the safety
instructions of your plasma
cutter.
Always wear a welding helmet
„
while welding and plasma
cutting. If it is not used, you
could sustain severe lesions to
the retina.