Residual Risks - Checchi & Magli WOLF COMPACT Bedienungs- Und Wartungsanleitung

Information and safety signs
Danger - Warning
Check that all the plates are legible; if they are not,
clean them or - if they are damaged - replace them,
applying the new ones in the same place as the old
ones.
E
UN41 0108BM
A) Information plate: strap up at the anchor points
shown to lift the work vehicle.
B) Hazard plate: do not remain on the seat with the
work vehicle lifted off the ground.
C) Hazard plate: read the use and maintenance manual
before using the work vehicle.
D) Hazard plate: switch off the tractor before carrying
out any type of work on the work vehicle.
E) Information plate: lubricate the chain inside the
casing to which the plate is affixed.
Noise
Having the planting machine coupled to the tractor
does not mean a significant increase in the noise levels
of the tractor.

Residual risks

During the design and construction stages, the manufac-
turer has focused particular attention on safety aspects;
nevertheless the risks described below remain.
- Risk of cuts and shearing (upper limbs) between the
drilling cups and the dispenser discs.
English language
TECHNICAL INFORMATION
C B
L
The illustration shows the locations and meanings of the
safety signs.
D A
F) Hazard plate: this highlights a risk of hands being
crushed in the moving parts of the dispenser featur-
ing drilling cups.
G) Information plate: lubricate rotating parts of the
drilling cups.
H) Information plate: this shows the number of cups
and their layout on the control disk.
L) Plant spacing plate: this shows the number of
cups to fit on the dispenser, the type of gear to use
(number of teeth) and the most suitable plant spac-
ing to adopt for the type of soil.
Check the tractor manufacturer's manual to decide
which PPE to adopt for hearing protection.
- Risk of getting caught/dragged/trapped by the mov-
ing parts of the transmission.
- Risk of slipping when getting on and off the planting
unit seat.
9
2
G F
H
Use and maintenance