Checchi & Magli WOLF COMPACT Bedienungs- Und Wartungsanleitung Seite 66

Troubleshooting
The following list contains a number of common problems that may arise during work, together with the ways to
solve them.
Problem
The seedling planted is too close to
the surface or too deep
The hole made in the plastic mulch
by the drilling cup is too long
The soil has not been properly
compacted on top of the seedlings
There is soil building up in front of
the resting skid
The plastic mulch is being
damaged
English language
MAINTENANCE INFORMATION
Likely cause
Incorrect planting depth
Incorrect transmission ratios for
the soil type
Packing wheels not set correctly
Transplanting unit is applying too
much force to the ground
Transplanting unit is applying too
much force to the mulch sheet
28
Solution
Make the relative adjustment (see
"Planting depth adjustment")
Select the correct ratio (see "Plant
spacing range") and replace the pinion
(see "Replacing the driving wheels
pinion")
Adjust the packing wheels (see
"Adjusting the packing wheels")
Adjust the force applied to the ground
by the unit (see "Adjusting the planting
force")
Adjust the force applied to the plastic
mulch by the unit (see "Adjusting the
planting force")
7
Use and maintenance