Checchi & Magli SP 140 Bedienungs- Und Wartungsanleitung Seite 39

Guards
WARNING
Never use the machine without the safety guards.
The work vehicle is fitted with guards covering the trans-
mission components to prevent accidental contact with
the moving parts.
A) Fixed guard: this prevents the operator coming into
contact with the moving parts of the transmission
system.
B) Fixed guard (shaft cone): this prevents the operator
coming into accidental contact with the coupling on
the driveshaft.
C) Guard: this prevents the operator coming into ac-
cidental contact with the driveshaft (see the manual
provided by the driveshaft manufacturer).
Information and safety signs
WARNING
Check that all the plates are legible; if they are not,
clean them or - if they are damaged - replace them,
applying the new ones in the same place as the old
ones.
H
G
UN41-0737CP
English language
TECHNICAL INFORMATION
H
A
F
5
A
UN41-0736CP
The illustration shows the locations and meanings of the
signs affixed.
A B C
2
B
C
D
E
G
H
Use and maintenance