Checchi & Magli SP 140 Bedienungs- Und Wartungsanleitung Seite 47

Adjusting transmission chain tension
D
UN41-0747CP
NOTICE
Do not overtighten the chain as this could cause pre-
mature wear of the chain and the sprockets.
Carry out the operations described.
1) Loosen the screws (A).
2) Unscrew the screw (B).
3) Remove the fixed guard (C).
English language
ADJUSTMENT INFORMATION
F (10 - 15 mm)
4) Loosen the sprocket (D).
5) Adjust the sprocket until you reach the sag value (F)
shown in the figure.
6) Tighten the sprocket (D).
7) Put the fixed guard (C) back in place.
8) Tighten the screw (B).
9) Tighten the screws (A).
13
A
A
B
5
C
Use and maintenance