Accessories And Spare Parts; Manufacturing Date - GCE MM40 - STABILIZER Bedienungsanleitung

Do not immerse in water or any liquid.
Do not clean electrical connections when the power is on. Make sure the connections are dry
before turning power back on.
9.3. SERVICE, CHECKS AND PERIODICAL CHECKS
Service on the MM40 - STABILIZER must be done at least annually. Yearly service can be only
done by a GCE certified person who also owns all necessary certificates in compliance with
national standards for mounting and repair of dedicated gas devices, including EN ISO 7396-1
and in compliance with standards for electro installations. For more information contact GCE or
distributor of GCE products.
During this service some product components may be changed, for ex. safety valve, regulator,
ball valve, etc.
For information about a service in your surrounding please contact GCE or distributor of GCE
product.

10. ACCESSORIES AND SPARE PARTS

LIST OF BASIC ACCESSORIES:
Standard accessories are alarm (like Gas Alarm).
Contact supplier of the system or GCE dealer for spare part lists.
Use only GCE original spare parts!
11. LIFETIME AND DISPOSAL
11.1. LIFE TIME AND WASTE MANAGEMENT
The maximum life time of the product is 10 years at compliance of Examination schedule
(chapter 10). At the end of the product's life time, the product must be withdrawn from service.
The owner of the device shall prevent the reuse of the product and handle the product in
compliance with "Directive of European Parliament and Council 2008/98/EC on waste".
In accordance to Article 33 of REACH GCE, s.r.o. as responsible manufacturer shall inform all
customers if materials containing 0.1% or more of substances included in the list of Substance
of Very High Concern (SVHC).
The most commonly used brass alloys used for bodies and other brass components contain
2-3% of lead (Pb), EC no. 231-468-6, CAS no. 7439-92-1. The lead will not be released to the gas
or surrounding environment during normal use. After end of life the product shall be scrapped
by an authorized metal recycler to ensure efficient material handling with minimal impact to
environment and health.
To date we have no information that indicates that other materials containing SVHC of
concentrations exceeding 0.1% are included in any GCE product.
11.2. MANUFACTURING DATE
The manufacturing date is included in product serial number which is marked on back plate.
Serial number composition is the following: YYMMXXXXX
Y: 2 last numbers of the year of manufacture
M: month of manufacture
X: production number
The perforation in the device label indicates the year when the equipment has to be disposed
off.
11/88
EN