Xylem SI Analytics Titroline 7000 Gebrauchsanleitung Seite 192

192
Depending on the application and duration, the time unit is defined in second, minute or hour (Fig. 145).
Fig. 145
For example, measurements up to 2 hours can be entered in seconds (Fig. 146).
Fig. 146
With a measuring interval of 60 seconds, that would be a total of 120 readings.
Up to 1000 measuring points can be recorded for a pH-Stat titration (Fig. 147).
Fig. 147
Even if the measuring interval is set to 60 seconds, or 5 hours, the pH value is still maintained constant over
the entire period. The number of measured values does not affect the titration control.