Automatic Stirrer Control; General; Basic Setting In The System Menu - Xylem SI Analytics Titroline 7000 Gebrauchsanleitung

242
9.4

Automatic stirrer control

General

9.4.1
If the magnetic stirrer TM 235 or TM 235 KF is connected via USB, the stirrer can be controlled via the titrator.
A suitable connection cable is included with the TM 235 / TM 235 KF.

Basic setting in the system menu

9.4.2
Connect the magnetic stirrer with the USB cable to one of the two USB A sockets.
Under «System Settings», select «Stirrer Control» (Fig. 274).
Fig. 274
Confirm the selection with <ENTER>/<OK>. The default setting is set to «free». The stirrer control thus only
works with the thumb wheel on the magnetic stirrer (Fig. 275).
Fig. 275
If you want to deactivate the stirring speed when switching on, you must select the speed «0» level (Fig. 276).
Fig. 276