Approval; Ce Declaration Of Conformity; Warranty - Handicare IBIS XC Bedienungsanleitung

Approval

The product meets the following
standards:
1. EN12183 (1999) Hand-operated
wheelchairs.
2. ISO7176-8 Requirements for
impact, static and fatigue strength.
3. ISO7176-9 Climate tests for
wheelchairs and scooters.
4. ISO7176-16 Requirements of
resistance to fire.
5. ISO 7176-19 Crash test.

CE declaration of conformity

The product is in conformity
with the provisions of the
Medical Devices Directive
and thus has CE marking.

Warranty

In the following warranty and liability
stipulations the terms and definitions
as summed up hereafter must be
explained as follows:
•
Product: The hand-operated or
electric wheelchair or scooter
manufactured and delivered by
Handicare.
•
Customer: The person who directly
obtains a Product from Handicare.
•
Dealer: The person who delivers a
Product obtained from Handicare to
customers or third parties.
•
User: The person who uses a
Product manufactured by
Handicare.
Irrespective of what is determined
concerning warranty conditions
applicable to the Product, in any case
the following applies with regard to the
warranty:
1. Except insofar as described
otherwise Handicare guarantees
the Product for its suitability for the
purpose for which the Product is
intended - all of these points as
described in this manual - and for
the quality of the material of which
the Product is made and the
manner in which the Product is
manufactured.
2. Repairs or replacement of parts of
the Product that may be necessary
as a result of faults that are based
on qualitatively faulty material or
manufacturing errors will be
executed free of charge, as long as
such faults occurred within one (1)
year after the date of delivery of the
Product to the Customer. The parts
to be replaced must be shipped
post-paid to Handicare.
Disassembly or assembly of these
parts is for the expense of the
Customer. Therefore the following
cases are not eligible for free repair
or replacement as meant above:
•
The repair or replacement that
is necessary in connection with
faults that arise after one (1)
year after the date of delivery
of the Product to the
Customer;
•
The repair or replacement that
is required in connection with
faults due to improper or
careless use of the Product or
that are based on the Product
being used for another
purpose than the one for which
it is intended, in which regard it
applies that if the Customer is
a Dealer, this Dealer will
indemnify Handicare against
possible claims from Users or
other third parties for faults
based on an incorrect or
careless use of the Product;
•
Parts that are subject to wear,
and the need for repair or
replacement of the parts are
the actual consequence of
normal wear.
Introduction
25