Clatronic ar 773 Bedienungsanleitung Seite 33

• REG Function
At certain times some stations divide up their
programmes into regional programmes with varying
content.
REG ON: The message „REG ON" appears in the
display for a few seconds.
NOTE:
• The display capacity is limited. It is possible that
in the double display mode some segments of the
display are deleted.
• The function REG ON prevents the radio from
switching to alternative frequencies which have a
different regional programme content.
REG OFF: The programme identifi cation (PI) of the
regional programme is ignored during the search for an
alternative frequency (AF) or a programme identifi cation
(PI).
• PI MUTE/PI SOUND (only for radio operation)
If you are in an area where two programme identifi ca-
tions (PI) overlap, you can select the option PI SOUND
and PI MUTE for playback of the sound. Alternate
switching of the programme identifi cation should be
avoided.
PI SOUND: If switching nevertheless occurs the sound
of another station is heard for less than one second.
PI MUTE: The sound of another station is suppressed.
• AF (Alternative Frequencies)
AF is a function that works with the help of RDS (Radio
Data System) and can only be used with FM stations.
The radio searches in the background for the best fre-
quency reception of the station that has been tuned into.
AF ON: If the AF function has been switched on, the
radio continuously tests the signal strength of the AF
frequency. The test interval for each AF frequency
depends on the signal strength of the current station
and varies from a few minutes in the case of a strong
signal to a few seconds in the case of weak signals.
Whenever the new AF frequency is stronger than the
station that is currently tuned in, the radio switches to
this frequency for a short time and the message „NEW
FREQUENCY" is displayed for one to two seconds. As
the mute time during the frequency change and the test
time is very short, this is almost inaudible during the
normal programme.
NOTE:
The AF function can also be activated by keeping the
TA/AF button (8) pressed down.
05-AR 773 DVD_GB.indd Abs1:33 05-AR 773 DVD_GB.indd Abs1:33
The status of the AF function is shown by an AF symbol in the
display.
• If the AF symbol appears in the display, the AF function
is switched on and RDS transmission data is being
received.
• If the AF symbol fl ashes in the display, the AF function
is selected but no RDS signal can be received at the
moment.
AF OFF: The function is switched off. The AF symbol in the
display goes off.
12. Button
See section 6./12.
13. II-/CH 1-6 Button
Radio Mode:
Press repeatedly to select the 6 preset radio stations of the
current FM or MW band.
CD/DVD/USB Operation:
Press the II-/CH 1-6 button to interrupt playback of the
CD (pause function). Press this button again to cancel this
function.
14. /MOD button (on/off button / operating mode)
a) Press this button to switch the device on. WELCOME
appears in the display. Keep this button pressed to
switch the device off. SEE YOU appears in the display.
b) Press this button to select the CD/DVD player, AUX IN,
BT MUSIC, radio mode etc.
15. APS/DISP Button (Autostore - Automatic Station Storage)
In radio mode:
a) Memory function:
Move the SEL button in the direction of APS for approxi-
mately 2 seconds to activate automatic station storage.
The device searches within the current frequency band
for the greatest signal strength until the search cycle is
complete. The six strongest stations are then allocated
to the corresponding storage locations. Then the station
of the fi rst storage location (FM1) is set.
b) Scan Function:
If the SEL button is moved briefl y in the direction of
APS, the radio briefl y plays all the preset stations of the
frequency band.
NOTE:
The scan function ends automatically at the fi rst
storage location of frequency band FM1.
In DVD mode:
Move the SEL button a short distance in the APS/DISP
direction in order to turn the TFT monitor on the device off
and on again.
33
19.10.2007 14:14:43 Uhr 19.10.2007 14:14:43 Uhr