Clatronic ar 773 Bedienungsanleitung Seite 29

Connect the device as shown in the diagram.
Antenna connection
Red
Ignition (B+)
Constant current
Yellow
connection (B+)
Black
Earth (B-)
Automatic
Blue
antenna
Loudspeaker,
front left
Loudspeaker,
rear left
Note:
• The device should only be switched on after all cables have
been connected.
• Please use loudspeakers with an impedance of 4 ohm.
• The loudspeaker cables must be unearthed.
• If a subwoofer is connected, an amplifi er is required.
• The earth connection cable (handbrake B-) must be
connected in order for DVD pictures to be played back to the
monitor. If the cable has not been correctly connected, the
message „PARKING BRAKE" appears on the monitor.
05-AR 773 DVD_GB.indd Abs1:29 05-AR 773 DVD_GB.indd Abs1:29
Connection
ISO connection
Fuse
Fuse/
fi lter box
(Only about version at RCA output cable)
Fuse
White
Grey/black
White/black
Green
Violet/black
Green/black
White
Green
Yellow
AUX (optional)
RCA cable
RCA cable / output
rear (optional)
RCA cable / output
front
Grey
Loudspeaker,
front right
Violet Loudspeaker,
rear right
• It is possible to use the integrated TFT screen as a monitor
for an optional reversing camera (not supplied). Connect the
„(B+) 12V camera on rear" connection to the reversing light
of your vehicle and connect the camera to „camera input on
rear (yellow)". After the vehicle is put into reverse gear the
camera image appears on the monitor. For more detailed
information please see the operating instructions for your
reversing camera.
NOTE:
If there is no 12V supply to the „(B+) 12V camera rear"
connection the picture from the camera is not displayed
on the monitor.
(B+) 12 V
Camera rear
(B-) Hand brake
Camera input rear
Video input rear
Audio input R (red)
Audio input L (white)
Subwoofer (grey)
Video output 2 (yellow)
Coaxial output (brown)
R red
L white
RCA front right (red)
Video output 1 (yellow)
RCA front left (white)
29
19.10.2007 14:14:41 Uhr 19.10.2007 14:14:41 Uhr