Locating A Track Or Particular Portion On A Cd - JVC KD-SH909R Bedienungsanleitung

Notes:
• When a disc is in the loading slot, selecting "CD"
as the source by pressing SOURCE
CD play.
• When a disc is inserted upside down, the disc
automatically ejects.
• If a name has been assigned to the CD (see page
41), it will be shown on the upper line of the main
display.
• When you play a CD Text, the disc title/performer
and track title will appear, followed by the elapsed
playing time (and track No.) See also "Playing a
CD Text" (page 23) and "To select the scroll mode
– SCROLL" (page 39).
If a CD Text includes too much text information,
some may not appear on the display.
• If you turn off the power or change the source, CD
play stops (without ejecting the disc).
Next time you turn on the power or select CD as
the source, CD play starts from where playback
has been stopped previously.
To stop play and eject the disc
Press 0.
CD play stops, the control panel moves down, and
the disc automatically ejects from the loading slot.
To return the control panel to its previous
position, press 0 again.
• If you keep the loading slot open for one
minute (or 30 seconds when you have ejected
a disc with the ignition key turned to "OFF"), a
beep sounds and the control panel returns to
its previous position.
Be careful not to get the disc or your finger
caught in between the control panel and the
unit.
Note:
If the ejected disc is not removed within 15 seconds,
the disc is automatically inserted again into the
loading slot to protect it from dust. (CD play will not
start this time.)
22
Locating a track or particular
portion on a CD
starts
To fast-forward or reverse the track
To go to the next or previous tracks
To go to a particular track directly
Press the number button corresponding to the track
number to start its playback.
• To select a track number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
• To select a track number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than 1
second.
Press and hold ¢
while playing a disc, to
fast-forward the track.
Press and hold
while playing a disc, to
reverse the track.
Press ¢
playing a disc, to go ahead
to the beginning of the next
track. Each time you press
the button consecutively, the
beginning of the next tracks
is located and played back.
4 briefly while
Press
playing a disc, to go back to
the beginning of the current
track. Each time you press
the button consecutively, the
beginning of the previous
tracks is located and played
back.
Track number
Elapsed playing time
4
briefly while