JVC KD-SH909R Bedienungsanleitung Seite 45

LINE INPUT (LINE): To select the component
AUX INPUT (AUX): To select the component
2
Turn on the connected component
and start playing the source.
• If connecting a JVC DVD player or VCR,
you can perform the following operations:
When connecting a DVD player:
: Turns on and off the power.
3:
Starts playback.
¡:
• Fast-forwards the chapter when
pressed and held.
• Skips to the beginning of the next
chapters when pressed briefly.
1:
• Reverses the chapter when pressed
and held.
• Goes back to the beginning of the
current chapter when pressed briefly.
Goes back to the beginning of the
previous chapters when pressed
consecutively.
7:
Stops playback.
Note:
When you press the above buttons, the display shows
"DVD" and its operation mode (such as 3, 7).
connected to the LINE
IN plugs on the rear.
connected to the
auxiliary input jack on
the control panel.
When connecting a VCR:
: Turns on and off the power.
3:
Starts playback.
¡:
Fast-winds a tape when pressed.
1:
Rewinds a tape when pressed.
7:
Stops playback.
Note:
When you press the above buttons, the display shows
"VCR" and its operation mode (such as 3, 7).
3
Adjust the volume.
4
Adjust the sound you want.
(See pages 33 – 35.)
To increase the level.
To decrease the level.
45