Setting The Clock - JVC KD-SH909R Bedienungsanleitung

To turn off the power
Press and hold SOURCE
appears on the display.
• If you turn off the power while listening to a
disc, CD play will start from where playback
has been stopped previously, next time you turn
on the power.

Setting the clock

1
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 37.)
2
Select the clock system.
1 Select "24H/12H" if not shown on the
display.
2 Select either "12HOUR" or "24HOUR."
1
3
until "SEE YOU"
4
5
2
To check the current clock time while the unit
is turned off, press D (display).
The power turns on, the clock time is shown for
5 seconds, then the power turns off.
Set the hour.
1 Select "CLOCK H (hour)" if not shown on
the display.
2 Adjust the hour.
1
Set the minute.
1 Select "CLOCK M (minute)."
2 Adjust the minute.
1
Finish the setting.
2
2
9