JVC KD-SH909R Bedienungsanleitung Seite 40

To select the target component to operate
through this receiver
You can operate either JVC's DVD player or VCR
through this receiver, by using the number
buttons on the control panel.
When shipped from the factory, these number
buttons are set to be used for the DVD
operations.
• DVD: To operate a JVC DVD player.
• VCR: To operate a JVC VCR.
• OFF: Not to use the number buttons for
operating other components.
To use these number buttons on the control panel
for DVD or VCR operations, see pages 44 and
45.
To change the FM tuner selectivity
– IF FILTER
In some areas, adjacent stations may interfere
with each other. If this interference occurs, noise
may be heard. This unit has been preset to
automatically reduce this interference noise
("AUTO") when shipped from the factory.
• AUTO: When this type of interference occurs,
this unit automatically increases the
tuner selectivity so that interference
noise will be reduced. (But the stereo
effect will also be lost.)
• WIDE: Subject to the interference from
adjacent stations, but sound quality
will not be degraded and the stereo
effect will not be lost.
40
– KEY SEL
To turn the tag display on or off
(only for KD-SH909R)
An MP3 file can contain file information called
"ID3 Tag" where its album name, performer, track
title, etc. are recorded.
There are two versions–ID3v1 (ID3 Tag version
1) and ID3v2 (ID3 Tag version 2). This unit is
compatible only with ID3v1.
When shipped from the factory, "ON" is selected.
• ON: Turns on the ID3 tag display while playing
MP3 files.
• If an MP3 file does not have ID3 tags,
directory name and file name appear.
Note:
If you change the setting from "OFF" to "ON"
while playing an MP3 file, the tag display will
be activated when the next file starts playing.
• OFF: Turns off the ID3 tag display while playing
MP3 files. (Only the directory name and
file name can be shown.)
– TAG DISP