Prohibiting Disc Ejection - JVC KD-SH909R Bedienungsanleitung

To play back the current track repeatedly
(One Track Repeat Play)
You can play back the current track repeatedly.
1 Press M (mode) while
2 Press RPT (repeat) while still
When the repeat mode is turned on, the RPT
indicator lights up on the display.
To play back only intros (Intro scan)
You can play back the first 15 seconds of each
track sequentially.
1 Press M (mode) while
2 Press INT (intro scan) while
4
• During intro scan play, track numbers flash.
• When the intro scan play ends, normal
playback resumes.
24
playing a disc. The unit
enters the functions mode.
in the functions mode, so
that "REPEAT" flashes on
the display.
Then, each time you press
RPT, One Track Repeat Play
turns on and off alternately.
When One Track Repeat
Play is turned off, All Track
Repeat Play is activated.
RPT (repeat) indicator
playing a disc. This unit
enters the functions mode.
still in the functions mode, so
that "INTRO" flashes on the
display.
Then, each time you press
INT, intro scan play mode
turns on and off alternately.

Prohibiting disc ejection

You can prohibit disc ejection and can lock a disc
in the loading slot.
Note:
If you press 0 while disc ejection is prohibited, the
control panel moves down, but the disc cannot be
RPT
ejected.
To return the display panel to its previous position,
press 0.
To cancel the prohibition and unlock the disc,
press and hold 0 for more than 2 seconds again,
while pressing SEL (select).
"EJECT OK" flashes on the display for about 5
seconds, and the disc is unlocked.
While pressing SEL (select),
press and hold 0 for more than 2
seconds.
"NO EJECT" flashes on the
display for about 5 seconds, and
the disc is locked and cannot be
ejected.