Tuning In To A Preset Dab Service; What You Can Do More With Dab; Tracing The Same Program Automatically (Alternative Reception) - JVC KD-SH909R Bedienungsanleitung

Tuning in to a preset DAB
service
You can easily tune in to a preset DAB service.
Remember that you must store services first. If
you have not stored them yet, see page 51.
1
Select the DAB tuner.
AM TUNER (AM)
DAB TUNER (DAB)*
CD CHANGER (CDCH)*
LINE INPUT (LINE)***
AUX INPUT (AUX)***
* Without connecting the DAB tuner or CD
changer, you cannot select it as the source to
play.
** If a disc is not in the loading slot, you cannot
select CD as the source to play.
*** When "LINE IN" or "AUX IN" is set to
"OFF," you cannot select it as the source to
play. (See page 39).
2
Select the DAB band (DAB 1, DAB 2
or DAB 3) you want.
D1
(DAB 1)
3
Select the number (1 – 6) for the
preset DAB service you want.
52
When you select a source,
the power automatically
comes on.
Each time you press the
button, the source changes
as follows:
FM TUNER (FM)
CD**
Back to the beginning
Each time you press the
button, the DAB band
changes as follows:
D3
D2
(DAB 2) (DAB 3)

What you can do more with DAB

Tracing the same program automatically
(Alternative Reception)
You can keep listening to the same program.
• While receiving a DAB service:
When driving in an area where a service
cannot be received, this unit automatically
tunes in to another ensemble or FM RDS
station, broadcasting the same program.
• While receiving an FM RDS station:
When driving in an area where a DAB service
is broadcasting the same program as the FM
RDS station is broadcasting, this unit
automatically tunes in to the DAB service.
Note:
When reception switches between DAB and FM, the
listening volume level may increase or decrease
inconveniently. This change in the volume level results
from unequal audio injection levels at broadcaster site,
but not from the malfunction of this unit.
To use Alternative Reception
When shipped from the factory, Alternative
Reception is activated.
• See also "Changing the general settings (PSM)"
on page 36.
1
Press and hold SEL (select) for more than 2
seconds so that one of the PSM items
appears on the display.
Press ¢
2
or
(alternative frequency).
3
Turn the control dial to select the desired
mode.
• ON: Traces the program among DAB
services and FM RDS stations
— Alternative Reception. The AF
indicator lights up on the display
(see page 14).
• OFF: Deactivates Alternative Reception.
Note:
When Alternative Reception (for DAB services) is
activated, Network-Tracking Reception (for RDS
stations: see page 14) is also activated
automatically. On the other hand, Network-
Tracking Reception cannot be deactivated without
deactivating Alternative Reception.
4
Press SEL (select) to finish the setting.
4 to select "DAB AF"