JVC KD-SH909R Bedienungsanleitung Seite 30

To go to a particular directory directly
IMPORTANT:
To directly select the directories using the
number button(s), it is required that directories
are assigned 2 digit numbers at the beginning of
their directory names. (This can only be done
during the recording of CD-Rs or CD-RWs.)
Ex.: If directory name is "01 ABC"
=
press 1 to go to Directory "01 ABC."
If directory name is "1 ABC,"
pressing 1 does not work.
If directory name is "12 ABC"
=
press and hold 6 (12) to go to
Directory "12 ABC."
Press the number button corresponding to the
directory number to start playing the first file in
the selected directory.
• To select a directory number from 01 – 06:
Press 1 (7) – 6 (12) briefly.
• To select a directory number from 07 – 12:
Press and hold 1 (7) – 6 (12) for more than 1
second.
Notes:
• If "MP3" flashes on the display after you have
selected a directory, it means that the directory does
not contain any MP3 files.
• You cannot directly select a directory with a number
greater than 12.
To select a particular file in a directory, press
¢ 4 after selecting the directory.
or
30
To skip to the next directory—either on the
same hierarchy level or on a different
hierarchy level
On the control panel:
1 Press M (mode) while playing
an MP3 disc. The unit enters
the functions mode.
2 Press ¢
in the functions mode.
Each time you press the button
consecutively, the next
directory is located (and the
first file in the directory starts
playing, if recorded).
(See "Movement between the
directories" on page 26.)
On the remote controller:
Each time you press and hold the
PRESET
button consecutively, the next
directory is located (and the first file
in the directory starts playing, if
recorded).
(See "Movement between the
directories" on page 26.)
To skip to the previous directory—either
on the same hierarchy level or on a
different hierarchy level
On the control panel:
1 Press M (mode) while playing
an MP3 disc. The unit enters
the functions mode.
2 Press
in the functions mode.
Each time you press the button
consecutively, the previous
directory is located (and the
first file in the directory starts
playing, if recorded).
(See "Movement between the
directories" on page 26.)
On the remote controller:
Each time you press and hold the
PRESET
button consecutively, the previous
directory is located (and the first
file in the directory starts playing,
if recorded).
(See "Movement between the
directories" on page 26.)
briefly while still
4 briefly while still