Locating A Track Or A Particular Portion On A Cd - JVC kd-sc900r Bedienungsanleitung

To stop play and eject the CD
Press 0.
CD play stops and the control panel flips down.
The CD automatically ejects from the loading
slot. The source changes to the tuner (you will
hear the last received station).
• If you change the source, the CD play also
stops (without ejecting the CD).
Next time you select "CD" as the source, CD
play starts from where playback has been
stopped previously.
Notes:
• If the ejected disc is not removed for about 15
seconds, the disc is automatically inserted again
into the loading slot to protect it from dust.
(Disc play will not start this time.)
• You can eject the disc even when the unit is turned
off.
Locating a track or a
particular portion on a CD
To fast-forward or reverse the track
20
Press and hold ¢
while playing a CD, to
fast-forward the track.
Press and hold 4
while playing a CD, to
reverse the track.
To go to the next or previous tracks
Press 4
back to the beginning of the current track.
Each time you press the button consecutively,
the beginning of the previous tracks is located
and played back.
To go to a particular track directly
Press the number button corresponding to the
track number to start its playback.
• To select a track number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
• To select a track number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than
,
one second.
To go to a track quickly (+10 and –10 buttons)
1
Press M (MODE) to enter the functions mode
,
while playing a CD.
2
Press +10 or –10.
Press ¢
briefly, while
playing a CD, to go ahead
to the beginning of the next
track.
Each time you press the
button consecutively, the
beginning of the next tracks
is located and played back.
briefly, while playing a CD, to go
To skip 10 tracks* forwards to
the last track
To skip 10 tracks* backwards
to the first track