Fitting Adapter To Under Floor Lifting Platform; Fitting Adapter To Floor Lifting Platform - Bosch FWA 4630 Planungsmappe

4.3.3

Fitting adapter to under floor lifting platform

!
Pay attention to wiring when drilling!
!
Maintain a minimum distance of A>30 mm to prevent
crushing and shearing. Top edge of adapter flush
with runway, bottom edge must not project.
i
Heed the clearances and arrangement on Page 11.
Use the adapter as drilling template.
4.3.4

Fitting adapter to floor lifting platform

1 Runway (*)
2 Support section (*)
3 Nut M10 (4x)
4 Washer (4 x)
5 Adapter Unterflurbühne / Überflurbühne (2 x)
6 Bolt (4 off M10x40,4 off M10x90)
7 Spacer (1x, cut to length)
(*) Appearance varies according to lifting platform
Robert Bosch GmbH
Adapters | FWA 4630 / FWA 4630 + | 29
1 690 706 014
en
|
2018-03-13