Optional Accessories; Operating Temperature And Working Environment; Mounting Requirements; Required Tools - Bosch FWA 4630 Planungsmappe

1.3

Optional Accessories

Designation
Cable set 12 m with in-
stallation material
Cable set 15 m with in-
stallation material
Pit Adaption
Lift Adaptors for Above floor lifts
short
big
Lift Adaptors for above floor and un-
der floor lifts
short
big
double position
Adapter für
VLH 4245A/LA und VLH 4345A/LA
pullout set
Protection step
short
big
Turntable mechanical
370 x 350 x 50 mm
Tragkraft 800 kg
Turntable without electronic ¹
450 x 450 x 50 mm
load capacity 1000 kg
Sliding base short ²
)
450 x 450 x 50 mm
load capacity 1000 kg
Sliding base long ²
)
1050 x 460 x 50 mm
load capacity 1000 kg
Filler ³
)
Filler ⁴
)
Multi-Fit wheel clamp
Multi-Quick clamp
extension (camp)
storage wagon for
boards and clamps
wall bracket for boards and clamps
Turntable ramps ⁵
)
extension drive-up ramp
boards set LWB
(includes 2 boards)
drive-up plate
¹
) When the turntable blocked with shoulder stud 1 693 750 006
²
) When the sliding base is put down with drive up plate 1 690 401 008
³
) for Turntable 1 690 501 001
⁴
) for Turntable 1 690 311 002
⁵
) for Turntable 1 690 501 001 only when the turntable blocked
Robert Bosch GmbH
Order number
1 690 701 029
1 690 701 030
1 690 701 027
1 690 701 048
1 690 701 018
1 690 701 047
1 690 701 020
1 690 701 078
1 690 701 123
1 690 701 070
1 690 701 072
1 690 701 045
1 690 311 002
1 690 501 001
)
1 690 401 003
1 690 401 004
1 690 702 082
1 690 702 157
1 690 311 089
1 690 503 200
1 690 701 127
1 690 701 041
1 690 701 040
1 690 701 044
1 690 702 164
1 690 701 032
1 690 401 008
General Information | FWA 4630 / FWA 4630 + | 17
1.4 Operating Temperature and working
environment
Function
Operating temperature
Storage temperature
Rel. humidity (operation)
operating altitude

Mounting Requirements

The following requirements have to be met before be-
ginning the installation.
!
This Installion guide shows the minimum require-
ments for the correct installation of the FWA 4630 / FWA 4630 +.
Special national regulations must be followed. The
Robert Bosch GmbH is not responsable for damages
caused by not following national regulations.
i
Use only lifts approved for wheel alignments. (chap-
ter 1.1).
1.5

Required Tools

The following tools are required for the installation:
R
Electric drill
R
Drill Bits (Ø5, Ø11)
R
Spirit Level
R
Tape measure
R
Allen key set
R
Socket Set
en
Specification
+5 °C - +40 °C
-20 °C - +60 °C
10 % - 90 % (40°C)
-200 m - 2000 m
|
1 690 706 014 2018-03-13