Using The Detachable Front Panel - Clatronic AR 819 BT/USB/Card Benutzerhandbuch

USING THE DETACHABLE FRONT PANEL

To Detach the Front Panel
1. Press the release (
front panel will be folded down.
OPEN
2. To remove the front panel, lift it up at a
little angle from horizontal position, then
first pull out the right side and then pull
out the left side.
Front Panel
3. For safekeeping, store the front panel in
the supplied protective case immediately
after being removed.
To Install the Front Panel
1. To install the front panel, first insert the
left side into proper position then insert
the right side into place.
The left side
Front Panel
All manuals and user guides at all-guides.com
2. When the two sides fixed into place,
) button, then the
3. Note that if the front panel fails to lock in
Precautions when handling
1. Do not drop the front panel.
The right side
2. Do not put pressure on the display or
3. Do not touch the contacts on the front
4. If any dirt or foreign substances
5. Do not expose the front panel to high
6. Keep away any volatile agents (e.g.
7. Do not attempt to disassemble the front
The right side
29
push the front panel into main unit.
position properly, pressing control button
may not function and the display may be
missing some segments. Press the
release button and then reinstall the front
panel again.
control buttons when detaching or
re-installing the front panel.
panel or on the main unit body. It may
result in poor electrical contact.
adhered on the contacts, they can be
removed with a clean and dry cloth.
temperatures or direct sunlight in
anywhere.
benzene, thinner, or insecticides) from
touching the surface of the front panel
panel.