Understanding The Menu Structure; Using The Menu; Changing The Default Settings - Clatronic AR 829 DVD Bedienungsanleitung

Selecting previous chapter/track
Press the " SEEK-" button (Fig. 1/16) to jump to the start of the
previous chapter or track.
Selecting next chapter/track
Press the " SEEK+" button (Fig. 1/16) to jump to the start of
the next chapter or track.
Selecting track directly
Enter the number of the desired chapter/track with the
Numerical Buttons on the remote control (Fig. 1/11).
Replay of the track starts after a short while.
Using fast forward or reverse
The DVD-Player has a fast forward and a fast reverse feature.
1. Quickly press SEEK+ (Fig. 1/16) or
1/16), to start fast forward or fast rewind. The current replay
direction and the speed, e.g. "FORWARD x 2 " is now
displayed on screen.
2. Quickly press the SEEK+ or
ly, to change the speed. The speed can be accelerated by
factor 2x, 4x, 8x, 16x or 20x.
3. Press the " " button (Fig. 1/1) to restart the "normal"
replay when the desired section is reached.
Enlarging a screen section
You can change the screen section when viewing DVDs, VCDs
or images.
Press the ZOOM button (Fig. 1/8) to change the screen section.
Press the button several times to select the suitable zoom factor
or to return to the original zoom factor.
NOTE:
With the cursor buttons (Fig. 1/21) you can move through the
zoomed image.
Changing the viewing angle
Some DVDs offer the possibility to select the viewing angle.
Press the ANGLE button (Fig. 1/6) to change the viewing angle.
NOTE:
If changing the Viewing Angle is not possible, the symbol " "
will be displayed.
Repeat pressing the the button to choose a different viewing
angle, or to return to the original viewing angle.

Changing the default settings

A large number of default settings can be comfortably changed
via the screen menu.
Press the SETUP-button (Fig. 1/5) on the remote control to start
the menu for changing the default settings (only in DVD mode).
Many of these default settings can be changed via both the
remote control and the menu. The difference is: If you change
the default settings via the remote control, these changes will
only be valid until the DVD-Player is switched off or the DVD is
changed.
However, any changes made in the menu are permanent.
The Setup menu has two menu levels:
• Main menu: The main level is represented by graphical
• Sub-menu: The corresponding sub-menu options can be
SEEK- (Fig.
Navigation and selection
SEEK- button repeated-
• Use the Cursor Buttons (Fig. 1/21) ( , ) on the remote
• In contrast to this, you must use the Cursor Buttons ( , )
• Select a menu option with the ENTER-button (Fig. 1/22).
• Use the ENTER-button also to select an option (e.g. "PAL"
• Press the direction button
Slide control
In some menus you will find slide controls. The slide control is
used as follows:
1. Select with the ENTER-button.
2. Move the control with the Cursor Buttons ( , ).
3. Confirm the entry with the ENTER-button.
NOTE:

Understanding the menu structure

symbols.
found under each of the main menu options.

Using the menu

control to browse through the main menu.
to move in the sub-menu.
in the illustration on the top). The selected option is now
highlighted.
return to the submenu.
29