Basic Operation; Switching On/Off The Unit; Faceplate Release; Sound Adjustment - Clatronic AR 819 BT/USB/Card Benutzerhandbuch

OPERATION

BASIC OPERATION

SWITCHING ON/OFF THE UNIT

Press button (14) to turn on the unit.
When the unit is on, press and hold
button (14) to turn the unit off.

FACEPLATE RELEASE

Press button (2) to detach the
removable faceplate.

SOUND ADJUSTMENT

Shortly press SEL/MENU button (26) to
enter AUDIO SETTING
SEL/MENU button (26) or
select the desired adjustment mode. The
adjustment mode will change in the
following order:
Bass/Treble/Balance/Fader/Sub-woof/ON/
OF(Exit)



Shortly press / (25) to adjust the sound
quality up or down step by step, press and



hold / (25) will change the sound quality
continuously.
Shortly press MUTE button (14) will mute
the sound, press it again will resume the
sound.

LOUDNESS

Press LOUD button (24) for several
seconds to switch loudness function on,
and "LOUD" will appear on the LCD. Press
it for several seconds again to release this
function, and "LOUD" will disappear.

DISPLAY

Press DSP button (19) to change display
mode.

EQUALIZATION

Press EQ button (22) shortly to turn on
equalization function and to select desired
audio mode. There are five kinds of mode
as below:
→FLAT→CLAS→POP M→ROCK→DSP OFF
All manuals and user guides at all-guides.com

RESET FUNCTION

RESET button (29) must be activated with
either a ballpoint pen or thin metal object.
The RESET button is to be activated for the
following reasons:
-
-
-
Note: if press RESET button (29), the unit
can't work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the
mode, use
socket on the front panel.
/ (1) to

MODE SELECTION

Shortly press MOD button (5) to change the
mode among: Radio, CD, USB, CARD,
IPOD (optional), AUX and BT Audio.

SYSTEM SETTING

Press and hold MENU button (26) on the
front panel to enter SYSTEM SETTING
mode.
Use SEL button (26) or
the item you want to change, and use
setting.
1) BEEP: ON/OFF
3) Area: Europe/USA Use

AUXILIARY INPUT

The unit can be connected to a portable
audio player through the AUX IN jack (30)
on the front panel. After finishing the
connection, you can press MOD button (5)
on the front panel to switch the mode to
AUX IN mode.
32
Initial installation of the unit when all
wiring is completed.
All the function buttons do not operate.
Error symbol on the display.
/ (25) to change the corresponding
To turn the beep sound on/off when
pressing the buttons on the front panel
2) P-VOL Select
You can setting the turn on volume. Evey
time turn on the unit the volume will be
the same as you setting.
select Europe or USA.
/ (1) to select
/ (25) to