Positioning The Cooking Grid; Securing The Grill Lid - Pit Boss PBCSL200 Montage- Und Betriebsanleitung

5.

SECURING THE GRILL LID

Parts Required:
Lid Handle (#1)
1 x
Vent Handle (#2)
1 x
Grill Lid (#3)
1 x
Installation:
• Remove the 2pcs screws that were
pre-installed on the bottom of the
lid handle, and then pass the screws
through the mounting hole on the
top of the lid to fix the lid handle
and lid handle bezel on the top of
the lid. Note 5A.
• Pass vent hanle through bar-shaped
hole on the back of the lid and lock
vent handle on the vent piece, and
cut off the cable tie on the vent
piece, so that vent handle can slide
toward left and right to drive the
vent to close. Note 5B.
• Place the grill lid over the cooking
grid. Secure the two safety latches
from each side of the grill body to
the grill lid. Note 5C.
• The unit is now assembled.
8
5A
5B
5C
1
2
3