Troubleshooting - Pit Boss PBCSL200 Montage- Und Betriebsanleitung

Proper cleaning, maintenance and the use of quality fuel will prevent common operational
problems. When your Pit Boss grill is operating poorly, or on a less frequent basis, the
following troubleshooting tips may be helpful.
For FAQ, please visit www.pitboss-grills.com or contact Customer Service for assistance.
WARNING: Ensure the grill is completely cooled prior to any
inspection, cleaning, maintenance or service work to avoid injury.
PROBLEM CAUSE
Charcoal Will Insufficient Air
Not Light Flow Through
Charcoal Box
Lack of Fuel In
Charcoal Box
Fan Failure
Thermometer Broken Part
won't read
Grill Too Hot Too Much
Airflow
Grill Not Hot Insufficient Air
Enough Flow

TROUBLESHOOTING

SOLUTION
Check charcoal box lid or airflow plate for ash build-up or
obstructions. Follow Care and Maintenance instructions
for ash build-up. Check fan. Ensure it is working properly
and air intake is not blocked.
Check charcoal box to verify that fuel level is sufficient,
and replenish if low. The recommended use of charcoal
briquettes is a maximum of 0.45 kg / 1 lb per burn.
Check fan to ensure it is working properly. Replace batteries
if needed. If fan needs to be replaced, contact Customer
Service for a replacement part.
Thermometer needs to be replaced. Contact Customer
Service for a replacement part.
Turn the Fan Control Knob to off and the Ventilation Knob
fully closed to allow the fuel to smother with lack of
oxygen. For low temperature cooking, use less fuel.
Turn the Fan Control Knob to maximum and the Ventilation
Knob fully opened to allow the grill to increase oxygen
airflow, burning charcoal more quickly and increasing the
temperature.
13