Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Parts are located throughout the shipping carton, including underneath the grill. Inspect
the grill and parts after removing from the protective shipping carton. Discard all
packaging materials from inside and outside of the grill before assembly, then review
and inspect all parts by referencing the parts list. If any part is missing or damaged, do
not attempt to assemble. Shipping damage is not covered under warranty. Contact your
dealer or Pit Boss Customer Service for parts: Monday through Sunday, 4am - 8pm PST
(EN/FR/ES).
Toll-Free: 1-877-303-3134 | Toll-Free Fax: 1-877-303-3135
Tools required for assembly: none
1.
INSTALLING THE FAN BATTERIES
Parts Required:
1
x
Grill Body (#9)
4
x
AA Batteries (not included)
Installation:
•
Place the grill body on a clean, level
surface. Tip the unit backwards (or
flip over) and remove the battery
compartment cover. Install four
batteries, and replace cover.
2.
INSERTING THE INNER SHELL
Parts Required:
1
x
Inner Shell (#8)
Installation:
•
Insert the inner shell into the grill
body. The rimmed lip of the inner
shell will rest on the edges of the
grill body.
6
ASSEMBLY PREPARATION
service@pitboss-grills.com
ASSEMBLY INSTRUCTIONS
1
2
9
8
9
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
