Installation Of The Product - Woodpecker DTE HANDPIECE TYPE S Benutzerhandbuch

Installation of handpiece
• Open the packing box, make sure that all the parts and accessories are complete according to the packing list. Contact with
dealer if necessary.
• Keep dry when the detachable handpiece connects to the connector of the cable before installing the handpiece.
• Make sure that the bottom jack point at the plug, make the handpiece fix to the cable correctly. (Picture 1)
Cap
Installation of tips
• Fix the tip to handpiece by torque wrench,
• Please use "WOODPECKER" brand scaling tips.
• The installing of the tip and endochuck toward direction as showed in picture 2.
Torque wrench
Endochuck

2 INSTALLATION OF THE PRODUCT

Handpiece decorative ring
Rod Handpiece
Endo wrench
Screw on
The connector of
cable
Tip
Pièce à main
File
cable
Picture 1
Screw on
Screw on
Picture 2
15