Introduction - Woodpecker DTE HANDPIECE TYPE S Benutzerhandbuch

Foreword
Guilin Woodpecker Medical Instrument Co., Ltd. is a professional manufacturer in researching, developing and producing
dental equipment which has a wholesome quality assurance system.
There are two brands of WOODPECKER company: WOODPECKER and DTE . Products include ultrasonic scaler, curing light,
apex locator and ultrasurgery, etc.
Description of device
Handpiece of Ultrasonic Scaler HANDPIECE TYPE S is the accessory of DTE series scalers, it is matched the DTE brand
ultrasonic scaler of our company. It is the handheld energy transformation part of ultrasonic scaler, by using piezoceramics to
transfer electric energy to mechanical energy for eliminate the dental calculus.
Model and dimensions
• Model: HANDPIECE TYPE S
• Dimensions: 117 mm (length) 21mm(diameter) 57g(weight)
• Product performance and structure Handpiece of Ultrasonic Scaler HW-3H is composed of cover and ultrasonic transdu
Product performance and structure
Handpiece of Ultrasonic Scaler HANDPIECE TYPE S is composed of cover and ultrasonic transducer.
Scope of applicaton.
• Handpiece of Ultrasonic Scaler HANDPIECE TYPE S is used for the dental calculus elimination when compatible with the
scalers V2, D3 which belong to DTE.
• Handpiece of Ultrasonic Scaler HANDPIECE TYPE S is used for the dental calculus elimination and root canal cleaning
when compatible with the scalers V3, D5, D7, which belong to DTE.
Contraindication
• The hemophilia disease patient is not allowed to use this equipment.
• The patients with heart pacemaker are forbidden to use this equipment.
• The doctors with heart pacemaker are forbidden to use this equipment.
• The heart disease patient, pregnant woman and children should be cautious to use the equipment.
The classification of the device
• Operating mode: Continuous operation
• Protection degree against water(used on the pedal): IPX1
• Degree of safety of application in the presence of a Flammable Anaesthetic Mixture with air or with Oxygen or Nitrous
Oxide : Equipment not suitable for being used in the presence of a flammable anaesthetic mixture with air or with oxygen
or nitrous oxide
The main technical specifications
• Power source Input: ~190V-230V
• Output primary tip Vibration excursion: 1μm~100μm
• Output tip Vibration frequency: 28kHz±3kHz
• Output half-excursion force: 0.1N~2N
• Tip's output power: 3W ~20W
• Water pressure: 0.01MPa ~0.5MPa
Working condition
• Environmental temperature +5°C ~+40°C
• Relative humidity: 30% ~ 75%
• Atmospheric pressure: 70kPa ~106kPa
14

1. INTRODUCTION