Mechanical; Service Interval; Repairs; Hints To The Renting/Leasing Of Probst Devices - probst SAFEFLEX SF Betriebsanleitung

Maintenance and care
5.1.1

Mechanical

SERVICE INTERVAL

First inspection after
25 operating hours
All 50 operating hours
Minimum 1x per year
(at rough conditions shorten the
interval)
5.2

Repairs

Only persons with the appropriate knowledge and ability are allowed to repair the device.
Before the device is used again, it has to be checked by an expert.
5.3

Hints to the renting/leasing of PROBST devices

With every renting/leasing of PROBST devices the original operating instructions must be included
unconditionally (in deviation of the users country's language, the respective translations of the original
operating instructions must be delivered additionally)!
Probst GmbH  Gottlieb-Daimler-Straße 6  71729 Erdmannhausen, Germany
5121.0001
Maintenance work

Control and tighten all screws and connections.
(The implementation is only allowed by an expert).

Tighten all screws and connections (take care that the tightening torques according
to the property class of the screws are observed).

Check all existing safety elements (such as linchpins) for perfect function and replace
defective safety elements.

Check all joints, bolts, guidance's and gears for correct function, if necessary adjust or
replace it.

Grease all grease nipples (if available) with a grease gun.

Check of all the suspension parts, bolts and straps. Check for corrosion and safety by
an expert.
info@probst-handling.de

www.probst-handling.de
V1
9 / 9
GB